Epson WF-C5790 Service Manual page 506

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
A19
In the following steps, ink may spill from the Ink Supply Tube. Prepare waste cloths
or similar in advance.
1. Remove the two screws (S8: ), and remove the Ink Supply Tube from the Printhead.
Make sure the plate was attached.
Disassembly/assembly
Ink Supply Tube
Plate
Ink Supply Tube
No. Screw Type
S8
C.B.EP-TITE SCREW,2.6X17(B=14),F/ZN-3C
Disassembly/Reassembly Procedures
Ink Supply Tube
Tube Holder
Tube Clamp
87.5 ± 1 mm
Marking
2. Remove the Ink Supply Tube from the Tube Clamp.
At the marking point on the Ink Supply Tube, attach the Ink Supply Tube to the Tube
Clamp. If the marking is not visible, refer to the drawing above to attach the Ink
Supply Tube.
3. Remove the Tube Holder while pressing the hooks outward.
Revision A
Ink Supply Tube
Hook
Hook
506
Confidential