Epson WF-C5790 Service Manual page 366

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
C10
Panel Board Relay Cable (Panel to Main)
D10
Relay Cable
CN101
Connector lock
Panel Board
CN311
Panel Board
CN302
Close Open
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
1. Disconnect the FFC from the connectors (CN302, CN311) on the Panel Board.
When disconnecting the FFC, make sure to unlock the connector lock beforehand.
C H E C K
P O I N T
2. Remove the eight screws (S4: ), then remove the Panel Board.
1. Disconnect the Relay Cable from the connector (CN101) on the Panel Board.
Disassembly/assembly Disassembly/Reassembly Procedures 366
Confidential