Epson WF-C5790 Service Manual page 303

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
RIPS Unit
Rear
Hole
Decompression
Ferrite core
Pump cable
Top
3. Pull the Decompression Pump Cable out from the hole of the Frame Base, and release the
ferrite core of the decompression pump cable from the Frame Base.
4. Remove the eight screws (S4: ) that secure the RIPS Unit.
Disassembly/assembly
Top
No. Screw Type
S4 C.B.P-TITE-SCREW-3x10-F.ZN-3C
Disassembly/Reassembly Procedures
RIPS Unit
Printer
RIPS Unit
As ink may leak in the following steps, prepare a waste cloth or the like in advance.
5. Remove the Joint from the Ink Supply Tube.
Revision A
Ink Supply Tube
Joint
303
Confidential