Service Mode Menu Configuration - Epson WF-C5790 Service Manual

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
Solution if enter and execute the wrong ID
 When a different mode starts:
If you enter the wrong ID and a different mode starts,
there is the possibility of changing important settings of
the unit, so press the power button to turn off the power
immediately and then perform the process again to enter
the correct ID number.
 When non-existent ID number:
The following panel LCD display appears and the power
is turned off automatically.
Input ID is not found!!
Please wait Poweroff...
Service support mode

5.1.2 Service mode menu configuration

Display
Printer Adjustments can be made when the ADF/SCN Unit
Inspection Mode has been removed.
In addition to the regular status sheet, it is possible to
Status Sheet
check the information necessary for performing
Print Mode
service.
User Log Get The detailed user log data inside the printer can be
Mode stored in the USB memory.
Debug Log
Write Mode
When performing trouble analysis, data concerning
Debug Config internal control, such as the processing time,
Read Mode processing status, etc. can be saved in the USB
memory connected to the printer.
Debug Config
Reset Mode
Service Support Mode
Revision A
Overview Usage situation
When performing
repair work
Troubleshooting
When product
analysis is
necessary
When there is an
implementation
instruction at the
time of occurrence
of an unknown
trouble
Confidential
218