Epson WF-C5790 Service Manual page 443

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
B4 C4
PF Scale
PF Encoder Board
Positioning holes
Dowels
1. Remove the screw (S9: ) that secures the PF Encoder Board.
2. Disconnect the FFC from the connector on the PF Encoder Board.
3. Remove the PF Encoder Board avoiding the PF Scale.
Attach the two dowels on the PF Encoder Board to the positioning holes of the frame.
Disassembly/assembly
PF Encoder Board
FFC
No. Screw Type
S9
C.B.S-TITE SCREW,2X8,F/ZN-3C
Disassembly/Reassembly Procedures
C5
PF Scale
1. Peel off the PF Scale.
The PF Scale cannot be reused once it is removed. Make sure to replace it with a new
one.
Revision A
PF Scale
443
Confidential