Epson WF-C5790 Service Manual page 377

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
B12
Panel Board
1. Disconnect the FFC from the connector (CN2) on the Panel Board.
2. Remove the four screws (S4: ), then remove the Panel Board.
Disassembly/assembly
Panel Board
FFC
CN2
No. Screw Type
S4 C.B.P-TITE-SCREW-3x10-F.ZN-3C
Disassembly/Reassembly Procedures
C12
Relay Cable
CN1
Panel Board
When disconnecting the Relay Cable, make sure to unlock the connector lock
C H E C K
P O I N T
beforehand.
1. Disconnect the Relay Cable from the connector (CN1) on the Panel Board.
Revision A
Relay Cable (Panel to Main)
Connector lock
Close Open
Confidential
377