Epson WF-C5210 Instructions

WF-C5210/WF-C5290
Start Here
Read these instructions before using your product.
1
Unpack
1
Remove all protective materials from the product.
2
Raise the printer cover and remove all protective materials
from inside the product, then close the printer cover.
3
Insert the output tray.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2
Turn on the product.
3
Select your language and time on the LCD screen.
Note: You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink supply units
(ink packs)
Note:
• The product is designed for use with Epson
third-party ink.
• The ink packs included with the product are designed for product
setup and not for resale.
• After some ink is used for charging, the rest is available for printing.
Caution: Keep the ink packs out of the reach of children and do not
drink the ink.
1
Unlock and open the ink pack tray cover, then remove the
packing material.
2
Press an ink pack tray to release it, then pull the tray out.
ink packs only, not
®