EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
B9
D9
Before removing the Inksystem Unit, release the carriage lock, and then move the CR
C H E C K
P O I N T
Unit to center of the printer.
In the next step, waste ink may spill from the Wasted Ink Tube. Prepare waste cloths
or similar in advance.
1. Slide the tube clamp, and remove the Wasted Ink Tube from the Wasted Ink Duct Holder.
Disassembly/assembly
Inksystem Unit
Wasted Ink Tube
Tube clamp
Wasted Ink Duct Holder
Disassembly/Reassembly Procedures
Inksystem Unit
Top
Grounding cable
Grounding cable
Upper Cap Frame
2. Remove the three screws (S5: ), then remove the Upper Cap Frame.
Secure the grounding cables together with the screws.
3. Disconnect the cable from the relay connector.
Revision A
Relay connector
Cable
No.
Screw Type
S5
C.B.S-TITE-SCREW-3x6-F.ZN-3C
385
Confidential