Epson WF-C5790 Service Manual page 285

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
A9 B9 C9
D9 E9 F9
Double-sided tape
Double-sided tape
1. Peel off the CRCM FFC.
2. Peel off the CRCR FFC Sheet.
Disassembly/assembly
Peel off the CRCM FFC
CRCM FFC Sheet Double-sided tape
CRCM FFC Double-sided tape
Disassembly/Reassembly Procedures
A10 B10 C10
D10 E10 F10
Plate
1. Remove the two screws (S6: ), and remove the Plate.
When installing the Ink Supply Tube to the RIPS Unit, make sure to tighten the
screws using a torque driver with the specified torque.
Screw tightening torque: 0.59±0.01Nm

Revision A
Plate
No. Screw Type
S6
C.B.SCREW-2.6X18-F.ZN-3C
285
Confidential