Epson WF-C5790 Service Manual page 202

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
No. Parameter Name
091 RX PAPER WIDTH
092 RX MAX LENGTH
093 ---
094 ---
095 ---
096 ---
097 ---
098 ---
099 ---
Troubleshooting
Table 4-6. FAX Service Parameter Table
Setting Range Initial value
A4
A4/B4 Auto
A4/B4/A3
1~65536 650
Fax Troubleshooting
Unit
Regardless of the paper size set in the apparatus,
It is used when you want to specify the paper width to receive fax fixed.
When changed, the receiving sheet width capability bit of the DIS signal to be
sent at the time of incoming call changes.
 Example of use
 When sending an A3 / B4 document on the sender side, judge whether
to transmit with A3 / B4 width or reduced size by looking at the
receiving paper width capability bit of the DIS signal of the receiver.
When the receiving sheet width capability bit = A 4, the image is
reduced / cut to A 4 and transmitted.
 A3 / B4 paper is not set on the device, but fax reception is done with A3
/ B4 and received as electronic data of A3 / B4 size by external memory
save / transfer
(Used when split printing is performed in full scale with substitution
output)
When the received original length exceeds this set value, the reception is
forcibly terminated.
Revision A
Remark
202
Confidential