Epson WF-C5790 Service Manual page 337

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
ADF/SCN Unit
ADF/SCN Unit
3. Open the ADF/SCN Unit.
4. Remove the two screws (S4: ), then remove the ADF/SCN Unit in the direction of the
arrow.
 Before screwing the ADF/SCN Unit, make sure the hinges are properly attached in place.
 If the ADF/SCN Unit is opened when the hinges are NOT secured, the unit may be damaged.
Disassembly/assembly
45 °
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Disassembly/Reassembly Procedures
F8
Hinge Assy (Left)
When removing the Main Board Assy on the way to the target part, remove the Hinge
C H E C K
P O I N T
Assy (Left) only.
1. Remove the each screw (S4: ), and remove the two Hinge Assy.
Revision A
Hinge Assy
Hinge Assy (Right)
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
337
Confidential