Epson WF-C5790 Service Manual page 200

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
No. Parameter Name
069 ---
070 BUSY TONE DETECT
071 BT DET ON TIME MIN
072 BT DET ON TIME MAX
073 BT DET OFF TIME MIN
074 BT DET OFF TIME MAX
075 BT DET COUNT
076 ---
077 ---
078 ---
079 ---
080 TCF CHECK
081 CED-DIS INTERVAL
082 REMOTE RX DET TIME
083 ERROR LINE MODE
Troubleshooting
Table 4-6. FAX Service Parameter Table
Setting Range Initial value
On
On
Off
5~65 40
30~100 60
4~65 40
30~100 60
2~4 4
Normal
Normal
Long
75ms
75ms
1sec
1~255 3
Rate
Rate
Line
Fax Troubleshooting
Unit
Minimum time to recognize busy tone signal on.
x10ms
Shorter than this time does not judge it to be a busy tone.
Maximum time to recognize busy tone signal on.
x10ms
Longer than this time does not judge it as a busy tone.
Busy tone signal off confirmation time.
x10ms
Upon detecting the busy tone signal off time longer than this setting, the
number of busy tone signals is counted as one.
If the OFF time is longer than this, it is judged that the busy tone signal has
disappeared.
x10ms
(Busy tone signal count is reset)
times
Level of judgment of line training.
If you make it long, more train the line situation. (It makes fall back easier)
Set the signal interval time between the CED signal and the DIS signal
selected at incoming call.
To disable the echo suppressor overseas communication, set it to 1s.
x10ms Adjust detection time of remote reception push signal.
Switching of error judgment mode of No-ECM reception.
Select number of error lines or error line rate.
Revision A
Remark
200
Confidential