Epson WF-C5790 Service Manual page 165

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
Receipt No. ~ Logs of the received faxes.
(3) Communication Description is same as Fax log.
result
Refer to
(4) DIS(DTC) / DCS
Ability bit table of DCS (P. 170)
Command / Response Refer to
(5)
Log
 Viewpoint of DIS(DTS)/DCS
Before starting communication, faxes communicate their own functions on
the sending side and the receiving side, and then determine the
communication function and speed.
The receiving side fax machine transmits its own function to the sending
side fax machine by the DIS signal.
The sending fax machine receives the DIS signal from the receiving fax
machine and can use the information on the sending side and the receiving
side.
After selecting the maximum function set by the transmission side, you can
check the communication mode selected by the DCS signal
By checking the information of DIS (DTC), the contents of the capability
of the receiving side fax can check the communication mode selected by
the sending side fax by checking the information of the DCS.
The protocol monitor log is recorded and printed on only one sheet by one
communication.
If the protocol becomes long due to communication of a plurality of pages
and it does not fit on one page, the head protocol log is deleted and only the
last protocol log is recorded and printed.
Fax communications are created according to ITU, and the main ITUs
involved are T30. and T4.
DIS (DTC) DCS reads out the content of FIF (facsimile information field)
by referring to the bit allocation table of DIS (DTC) / DCS.
Troubleshooting
Ability bit table of DIS (DTC) (P. 166) and
How to use command/response log (P. 174)
Fax Troubleshooting
Revision A
165
Confidential