Epson WF-C5790 Service Manual page 267

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
B1
Lock
Lever
Shaft and hole
1. Move the Lock Lever in the direction of the arrow, then open the RIPS Front Cover.
2. Take out the two axes from the housing holes while bending the RIPS Front Cover, and
then remove the RIPS Front Cover.
Disassembly/assembly
RIPS Front Cover
Shaft and hole
RIPS Front Cover
Disassembly/Reassembly Procedures
C1
D1 E1 F1
Dowel and
positioning hole
Housing Right
1. Remove the four screws (S4: ), then remove the Rear Cover (Back).
Attach the two dowels of the Rear Cover (Back) to the positioning holes on the
Housing Left and Housing Right.
Revision A
Rear Cover (Back)
Rear Cover (Back)
Dowel and
positioning hole
Housing Left
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Confidential
267