Epson WF-C5790 Service Manual page 523

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
A34
Guide Cover
1. Remove the two screws (S4: ), and remove the Guide Cover in the direction of the arrow.
Disassembly/assembly
Guide Cover
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Disassembly/Reassembly Procedures
A35
CN10
CN22
CN11
CN12
Tabs
Ink End Sensor (C/M) (CN30)
Ink End Sensor (Bk/Y) (CN31)
Ink Leak Sensor 1 (CN11)
Ink Leak Sensor 2 (CN12)
Ink Leak Sensor 3 (CN54)
Ink Leak Sensor 4 (CN55)
Temperature and Humidity Sensor(CN10)
1. Disconnect the cables from the connectors (CN2, CN10, CN11, CN12, CN22, CN30,
CN31, CN54, CN55) on the Relay Board.
2. Release the cables from the five tabs on the Frame Base.
Revision A
RIPS Unit
Relay Board
CN55
CN54
CN30
CN31
CN2
Drawer Connector (CN2)
Cover Open Sensor (CN22)
523
Confidential