Epson WF-C5790 Service Manual page 447

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
E8 F8
CN801
CN612
CN606
Grounding cable
When disconnecting the CISM FFC (CN601) from this connector, make sure to
C H E C K
P O I N T
unlock the connector lock beforehand.
1. Disconnect the cables and FFCs from following connectors on the Main Board.
• CN601 • CN606 • CN612
2. Peel off the acetate tape, then remove the grounding cable.
Disassembly/assembly
ADF/SCN Unit
Open Close
Connector Lock
Double-sided tape
CN601
Acetate tape
• CN801
Disassembly/Reassembly Procedures
ADF/SCN Unit
ADF/SCN Unit
3. Open the ADF/SCN Unit.
4. Remove the two screws (S4: ), then remove the ADF/SCN Unit in the direction of the
arrow.
 Before screwing the ADF/SCN Unit, make sure the hinges are properly attached in place.
 If the ADF/SCN Unit is opened when the hinges are NOT secured, the unit may be damaged.
Revision A
45 °
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
447
Confidential