Table of Contents
Advertisement
Manufacturers
D.1.6 USB>RS232/485 Converter 050201
The USB>RS232/485 Converter can be ordered at SIEB & MEYER as an optional ac-
cessory for device configuration. This converter is developed especially for the amplifier
series SD2x. Via the converter the devices can communicate with a PC without RS232
or RS485 interface.
A short USB cable is supplied with the converter. The connection cable to the drive am-
plifiers must be ordered additionally or built by yourself with suitable length.
SIEB & MEYER article number
050201
K362103xxxR01 (xxx = cable
length in dm)
For further information, refer to the document "050201 – USB>RS232/485 Converter".
102
Description
USB>RS232/485 converter
RS232 device connection cable to the converter 050201
Drive System SD2S - Hardware Description 0362x49xx / 0362129xx
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SD2S and is the answer not in the manual?