D Manufacturers; D.1 Sieb & Meyer Accessories; D.1.1 Connectors Of The Series Sd2S; D.1.2 Operating Terminal - SIEB & MEYER SD2S Hardware Description

Manufacturers

D Manufacturers

D.1 SIEB & MEYER Accessories
In the following you find all accessories for SD2S that you can order at SIEB & MEYER.
Note
Consider the information on accessories suitable for your device in the technical manu-
al.

D.1.1 Connectors of the Series SD2S

Connector/cable kits
SIEB & MEYER article number
32299600
A connector kit contains mating connectors for motor connection, mains supply, ballast
resistor, I/O contacts and safety as well as a suitable shield connection clamp. All items
are manufactured by Phoenix Contact.
Note
The connector kits do not include D-sub mating connectors for connecting the used
measuring systems.
Fiber optic connectors
SIEB & MEYER article number
12540102
12540202
32022900
47000001
47000002
47000003

D.1.2 Operating Terminal

SIEB & MEYERarticle number
0362150
0362153
32299567

D.1.3 Ferrite Core for Motor Cable

SIEB & MEYER article number
13163110
100
Device variant
0362149xx, 0362249xx, 0362129xx
Description
Female connector, input (black)
Female connector, output (gray)
Cable connector (Toslink F05)
Polishing disk for optical fiber cables
Dismantling tool for optical fiber cables
Grinding paper
Description
Plug-on operating terminal
Operating terminal for switch cabinet installation
Switch cabinet kit for operating terminal 0362150
Description
R 63/38/25, Al = 15150 nH
Drive System SD2S - Hardware Description 0362x49xx / 0362129xx