Mivoice Office 250 V6.3 New Features; Cloudlink With Mivoice Office 250; Support Of 6900 Sip Phones With Mivo Application Suite 5.1; Administration Features, When Using Sip Devices - Mitel MiVoice Office 250 Installation And Administration Manual

MiVoice Office 250 Installation and Administration Guide

MiVoice Office 250 v6.3 New Features

This section briefly describes the new features, hardware, and enhancements available on the
MiVoice Office 250 when equipped with the 6.3 software release.

CloudLink with MiVoice Office 250

The CloudLink Gateway can be connected to the MiVoice Office 250 with SIP trunks. It allows MiVoice
Office 250 Users (with DEE) to include their Mobile Device on which the OfficeLink App is installed.
The OfficeLink App supports system features. For more description on OfficeLink, and how to
configure CloudLink in MiVoice Office 250 DBP, see http://mitel.help.
No licenses are needed. The MiVoice Office 250 Release 6.3 detects CloudLink as a Trusted
Application and automatically releases the needed OAI and SIP trunk licenses. The Trunk group
configuration for CloudLink is supported with a new template for CloudLink.

Support of 6900 SIP phones with MiVO Application Suite 5.1

Mitel 6920, 6930 and 6940 SIP Phones are supported in conjunction with MiVO AppSuite 5.1.
The 6900 SIP phone configuration is supported with a new 6900 SIP phone type, that can be used
instead of the generic SIP phone type.
The MiVoice Office 250 Rel 6.3 supports additional SIP extension and trunk features, handset flags
and security improvements.

Administration Features, when using SIP devices

The MiVoice Office 250 R6.3 allows SIP devices to have Administrator and Door Relay rights. Clients
on Application Suite 5.1 have special keys defined to activate: Door Relay, Night Ring on/off, Clear
System Alarm, Diagnostics on/off, System History Freeze/Unfreeze, and Automatic Diagnostics
on/off.

Divert/Accept UCD Calls, when using SIP devices

SIP devices support the Hunt Group Remove/Replace feature. So, the incoming hunt group calls to
SIP phones can be stopped with the DBP flag, or by using the feature code (322 HG Remove, 323
HG Replace, 324 Toggle HG Remove/Replace).

SIP Reverse Transfer

Calls on hold or calls ringing on another phone or hunt group can be picked up by a SIP device.

Direct Page

Direct Page is an enhancement to the existing Page feature, which allows you to page to the
loudspeaker of an individual IP/ Digital Phone instead of a whole Paging Zone.
6