Endo Menu (Optional) - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.8 Using functions through the menu
Power output as a function of device pre-setting (foot control) and tip load (shown using
modes P3 and E as examples)
NOTE
Stay in the range of dynamic response to ensure that the treatment is gentle.
The output is adjusted according to load.

4.8.6 ENDO menu (optional)

NOTE
The functions of the ENDO menu are available only if an ENDO license is ex-
istent.
Start-up ENDO menu
The ENDO menu is started-up by:
▪ taking the ENDO motor out of the dentist element (setting in user menu,
option 5)
▪ activating the (M) "Additional motor drives" key afterwards
ENDO status menu
S1
S2 S3
The status of the ENDO motor is displayed in the ENDO menu:
Parameters
Transmission factor
Parameter memory
Torque mode
Direction of motor rotation
Speed
Torque
S4
Values
1:1, 3:1
P1,P2,P3,P4,P5,P6
TQ-Ctrl, Autoreverse, AutoRev/Forw.
R, L
100 to 6000 rpm
Transmission ratio 1:1: 0.15 to 2.50
Ncm
Transmission ratio 3:1: 0.4 to 8.0 Ncm
65 / 124