Piezousing The Piezo Softpiezoled - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.11 Using handpieces
4 Press the air button ① and continuously increase or decrease the exiting air
flow by applying more or less pressure on the air button ①.
or
4 Press the water button ④ and continuously increase or decrease the exiting
water jet by applying more or less pressure on the water button ④.
or
4 Simultaneously press the air button ① and water button ④ and continuously
increase or decrease the exiting spray by applying more or less pressure on
the two buttons.
Remove the cannula
4 Hold on to the valve body of the triple function handpiece and unscrew the
cannula.

4.11.4 PIEZOUsing the PIEZO SoftPiezoLED

Handpiece inserts can be damaged from long-term use, or when
dropped or bent.
They are not guaranteed to function properly.
Injury from insert breakage.
4 Check the handpiece inserts before each use.
Sharp-edged tips.
Risk of injury.
4 When not in use, always keep the supplied torque wrench attached to the
tip!
NOTE
Follow the encloses instructions for use "PIEZOsoft/PiezoLED".
Controlled through the menu
Also refer to:
4.8.5.2 PIEZOsoft/PiezoLED, Page 63
CAUTION
CAUTION
86 / 124