Setting The Cooling Status; Activating Blown Air (Optional); Preselecting Counterclockwise Motor Rotation; Setting The Instrument Light - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.10 Operating the foot control
ð The handpiece is active.
4 Press the foot pedal.
ð The removed handpiece runs at the set speed or intensity.
4 Changing speed or intensity with the foot pedal.
ð The left stop corresponds to the minimum speed/intensity.
ð The right stop corresponds to the maximum speed/intensity.

4.10.5 Setting the cooling status

4 Remove the handpiece (e.g turbine handpiece, motor) from the holder.
ð The handpiece is active.
4 "Preselected spray" footswitch.
ð The cooling status is switched each time the foot switch is pressed:
Spray air – spray.
ð The cooling status is displayed on the dentist element.

4.10.6 Activating blown air (optional)

4 Remove the handpiece (e.g turbine handpiece, motor) from the holder.
ð The handpiece is active.
4 Press the "Blown air" foot-operated button.
ð As long as the foot switch is pressed, blown air exits from the removed
handpiece (does not apply to PiezoLED).

4.10.7 Preselecting counterclockwise motor rotation

4 Take motor off the holder.
ð The handpiece is active.
4 Slide the cross-switch upward
ð The direction of motor rotation is reversed each time the cross-switch
and/or the "Direction of motor rotation" key is actuated: counterclock-
wise rotation - clockwise rotation.
ð The direction of motor rotation is displayed on the dentist element.

4.10.8 Setting the instrument light

4 Slide the cross switch to the right. (spotlight function)
ð Cold light on (even when "Cold light: off" is preselected).
80 / 124