Using Suction Hoses - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.11 Using handpieces
Borden handpieces
NOTE
In the case of Borden handpieces, the drive air needs to be adjusted for each
handpiece by a Service Technician using adjusting screw ③. The adjustment
can be made with the measuring set Mat. no. 0.4179.807 (Mat. no.
1.003.9374) or the test manometer for Borden handpieces Mat. no.
0.411.8531.

4.11.2 Using suction hoses

4 Remove the spray mist suction device or saliva ejector from the holder.
ð The spray mist suction device or saliva ejector automatically turns on, and
shuts off when it is replaced in the holder.
The suction flow of the saliva ejector or spray mist suction device can be re-
duced or blocked with the slide valves integrated in the handpieces.
4 Move the slide valve completely upward.
ð The slide valve is open: maximum suction.
4 Move the slide valve down all the way.
ð The slide valve is closed: no suction.
NOTE
Connectors for the spray mist suction and the saliva ejector without slider as
well as reducing pieces for the spray mist suction are available as accessories.
▪ Cannula holder, short, for spray mist suction ② (Mat. no. 0.764.5783)
▪ Cannula holder, long, for spray mist suction ② (Mat. no. 0.764.5853)
▪ Cannula holder, short, for saliva ejector ① (Mat. no. 0.764.5863)
▪ Cannula adapter, reducing handpiece to 7 mm ② (Mat. no. 0.764.5873)
▪ Cannula adapter, reducing handpiece to 11 mm ② (Mat. no. 0.764.5883)
6 5
6 5
83 / 124
1
2
3
4