Instructions for use ESTETICA E30
4 Operation | 4.10 Operating the foot control
Setting the timer
Prerequisites
ü Standby menu is selected.
4 To set a timer time (e.g. Timer 1), press the "Timer" key until you hear a
beep.
ð The display switches to the settings menu for the timer time.
S1
S2
S3
Key
Settings
S1
Parameters are saved.
Quits the programming mode.
S2
Changes the value.
S3
Changes the value.
S4
Switches counter/timer function. (Direction of counting)
4.10 Operating the foot control
4.10.1 General functions
The foot control foot switches have dual assignments. The function of the foot
control depends on if an instrument is mounted or removed.
Also refer to:
3.7.5 Foot control , Page 26
4.10.2 Positioning the patient chair with the foot control
Also refer to:
4.3.4.5 Recalling automatic positions through the foot control, Page 47Also
refer to:
4.3.3 Positioning the patient chair manually, Page 44
4.10.3 Preselecting the dentist
Prerequisites
ü All instruments are in their holders.
4 Hold down the foot pedal and press the stirrup switch.
ð Each time the stirrup switch is pressed, the selection advances to the
next dentist (dentist 1 to 6).
The number of dentists can be set in the user menu.
Two dentists are set as the default.
4.10.4 Starting and adjusting instruments
4 Remove the handpiece (e.g turbine handpiece, motor) from the holder.
S4
79 / 124