Using The Kl 703 Led In Endo Mode (Optional Accessory); General - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.12 Using the KL 703 LED in ENDO mode (optional accessory)
Operation with the foot control
4 Press the foot pedal.
ð The PIEZOsoft/PiezoLED works at the preset intensity.
4 To adjust the intensity, press the foot pedal and move it to the side.
4.12 Using the KL 703 LED in ENDO mode (optional
accessory)

4.12.1 General

NOTE
The endo drive can only be operated with the INTRA LUX KL 703 LED.
INTRA LUX KL 703 LED
Use of impermissible file systems.
Impermissible file systems may damage the product or cause personal injury.
4 Only use approved NiTi file systems with a conicity >2% that are suitable
for rotary reprocessing.
4 Only use files with shafts in conformance with DIN EN ISO 1797, DIN EN
ISO 3630-1 and DIN EN ISO 3630-2 having a shaft diameter of 2.334 to
2.350 mm.
4 Follow manufacturer's instructions (mode of operation, speed, torque levels,
torsion resistance, etc.), and use the files according to their intended use.
Use of damaged files.
Injury to the patient or damage to the medical device.
4 Before preparing each root canal, insert a dental dam for safety reasons.
4 Before each use, the files must be checked for possible signs of material fa-
tigue, deformation or excessive stress and must be replaced if any such
signs are evident.
CAUTION
CAUTION
87 / 124