Safety During Operation; Security Information - Siemens VersiCharge 8EM1310-F.0 Series Operating Instructions Manual

Ac wallbox - erk
Table of Contents

Advertisement

Safety information

2.6 Security information

2.5

Safety during operation

Observe the following points when operating the Wallbox, as well as the applicable regional
standards and regulations. Failure to follow safety instructions may result in hazardous
situations that could cause death or serious injury.
Electrical hazards
The Wallbox operates with a supply voltage of 3-phase 400 V AC. Touching live parts may
cause electric shock and could be fatal.
Work on the electrical installation may only be carried out by trained electricians and at zero
current.
• To disconnect, pull only on the charge coupling and not on the cable.
• Do not touch the charge coupling with moist or wet hands.
• Do not perform any installation, maintenance, or configuration work during a
thunderstorm.
• Do not connect the vehicle to or disconnect it from the Wallbox during a storm.
Charging cable and socket
Defective connectors or cables may cause fire. Decommission the system if there are defects.
Have the defective parts repaired by qualified personnel.
Do not bend or squeeze the charging cable; do not run it over sharp edges, and use it only
within the permissible temperature range.
Inspect sockets and the charging cable for damage on a regular basis.
2.6
Security information
Siemens provides products and solutions with industrial security functions that support
secure operation of plants, systems, machines, and networks.
In order to protect plants, systems, machines, and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Operators of the Wallbox are responsible for preventing unauthorized access to their plants,
systems, machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and insofar such a connection is
necessary, and only when appropriate safety measures (e.g. firewalls and/or network
segmentation) are in place.
Additional information on industrial safety measures can be found under
(https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends applying product updates as soon as they are available
and using the latest product versions. Use of product versions that are no longer supported,
and failure to apply latest updates may increase customer's exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under (https://www.siemens.com/industrialsecurity).
14
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC

Advertisement

Table of Contents
loading

Table of Contents