Hazards During Transport, Mounting, Operation And Maintenance; Personal Protective Equipment (Ppe); Fall Arrester; Danger To Life When Standing Under Raised Loads - Siemens SICHARGE D Dispenser Operating Instructions Manual

Table of Contents

Advertisement

The dispenser is supplied with a replaceable locking cylinder (standard half cylinder (10/30)
according to DIN 18252) and matching keys. Detailed instructions for replacing cylinders can
be found in section 3.4 "Display elements and operator controls" (Page 23).
2.2

Hazards during transport, mounting, operation and maintenance

2.2.1

Personal protective equipment (PPE)

Personal protective equipment protects you against hazards to your health and safety. Use
your personal protective equipment in accordance with occupational safety guidelines and
accident prevention regulations.
When working use the required personal protective equipment, such as:
• Safety shoes
• Helmet
• Safety vest
• Gloves
• Protective goggles
2.2.2

Fall arrester

Suitable and approved protective measures for personnel should be used when working at
heights above 1 m. These include work platforms with railings or fall arresters. Take the
necessary precautions to prevent tools and components from falling.
2.2.3

Danger to life when standing under raised loads

If hoisting gear or load handling equipment fails, a raised load can drop. If you are in the
hazardous area under or next to the raised load at this time, death, serious injury and
material damage may result.
• Always use hoisting gear and load handling equipment properly.
• Do not stay in the hazardous area under or next to raised loads.
2.2.4

Danger to life due to improper transport

If you transport the dispenser improperly, the device may tip over. This may cause death,
serious injury and property damage. Observe the following points:
• Only qualified persons are permitted to transport the dispenser.
• Only use approved means of transport and hoisting gear.
• Pay attention to the center of gravity of the dispenser. The center of gravity is marked on
the packaging.
• Note the weight of the dispenser listed in section Technical specifications (Page 78).
• Only transport the dispenser in a vertical position.
• The forks of the forklift must protrude at the rear of the transport pallet.
Dispenser
Operating Instructions, 10/2023, A5E52758387-AB
2.2 Hazards during transport, mounting, operation and maintenance
Safety instructions
11

Advertisement

Table of Contents
loading

Table of Contents