Software Control - Using Lightware Matrix Controller; Installing The Matrix Controller Software - Lightware UMX4x4-Pro User Manual

5. Software control – Using Lightware Matrix Controller
The matrix router unit can be controlled using Lightware Matrix Controller from a Windows
PC or Laptop through RS-232 or Ethernet port.
5.1.

Installing the Matrix Controller software

Step 1. Run Installer_LW_matrix_controller_v3_3_9.exe
Step 2. Select destination folder and click Install (Using the default path is highly
Step 3. If you want to create desktop icon click Yes in the next pop-up window:
Step 4. After finishing the installation the following message appears:
Page 44 / 129
recommended)
Section 5. Software control – Using Lightware Matrix Controller