Running The Software - Lightware MMX4x2 Series User Manual

   
8. Firmware Update
8.3. Running the Software
You have two options:
Starting the LDU2 by double-clicking on the shortcut/program file, or
▪
▪ Double-clicking on an LFP2 file.
LDU2 Interfaces
The software can be used over:
▪ The Graphical User Interface (GUI), or by
The Command Line Interface (CLI).
▪
LDU2 Auto-Update
At startup, the software checks whether a newer version is available on the web.
MMX4x2 series – User's Manual
Main Screen
When the software is started by the shortcut, the device discovery screen
appears. Press the Search for devices button to start finding the Lightware
devices:
If you start the software by double-clicking on the LFP2 file, the firmware will be loaded. Press the Search for devices
button; all the devices will be listed that are compatible with the selected firmware pack.

INFO:
right panel; see the
Applied firmware package: v1.6.0b19 | LDC software: v2.5.13b5
If you press the Select firmware package button, the release notes of the LFP2 file will be displayed in the
Step 1. Select the Firmware Package.
141
SEARCH FOR DEVICES
section.