System - Teldat IMBER SMART User Manual

IMBER SMART – Industrial Series

5.8.3 System

This section allows you to view the device's system settings.
System->General
Hostname
•
User-defined router name. This can be used in IPSec to identify the local device (local ID).
User LED Type
•
Define User LED behavior.
Time Zone
•
Select the time zone where the device is being used.
Customized Time Zone
•
Customize the time zone where the device is being used.
Enable (NTP Client)
•
Select Enable to use NTP client to synchronize the device's internal clock with a time server (NTP
server) on the network.
Primary NTP Server
•
Enter the IP address (or host name) of the primary time server.
Secondary NTP Server
•
Enter the IP address (or host name) of the secondary time server.
Synchronize Modem Time
•
Synchronize the time from the module.
Enable NTP Server
•
Check this box to make the router work as an NTP server.
User Manual
Page 79 / 92