Teldat IMBER SMART User Manual page 39

IMBER SMART – Industrial Series
Relay Server
•
Enter the IP address of the DHCP relay server.
IP Pool Start
•
When DHCP is enabled, external LAN devices connected to this unit will be assigned an IP address in
this range. This is the beginning of the IP address pool.
IP Pool End
•
This is the end of the IP address pool.
Netmask
•
Subnet mask of the IP address obtained by DHCP clients from the DHCP server.
Lease Time
•
Lease time of the IP address obtained by DHCP clients from the DHCP server.
Gateway
•
Gateway address obtained by DHCP clients from the DHCP server.
Primary DNS
•
Primary DNS server address obtained by DHCP clients from the DHCP server.
Secondary DNS
•
Secondary DNS server address obtained by DHCP clients from the DHCP server.
WINS Server
•
Windows Internet Naming Service obtained by DHCP clients from the DHCP server.
Ethernet->LAN->MAC Binding IP Settings
Enable
•
Check this box to enable the MAC binding IP feature.
Description
•
Enter a description for the MAC binding IP feature.
Host MAC Address
•
Enter the host's MAC address.
Host IP Address
•
Enter the host's IP address.
User Manual
Page 38 / 92