Table of Contents
Advertisement
IMBER SMART – Industrial Series
Wi-Fi->Wi-Fi Client
Enable
•
Checking this box will enable the Wireless interface.
Connect to Hidden SSID
•
Check this box to connect to a hidden SSID.
SSID
•
SSID of an external access point.
Password
•
Enter the password of the external access point.
Connection Type
•
Select a connection type from the dropdown list. Choose between DHCP Client and Static IP
address.
IP Address
•
Static address for this interface. It must be on the same subnet as the gateway.
Netmask
•
This will be assigned by the gateway.
Gateway
•
IP address of the Gateway.
Primary DNS
•
Entering the primary DNS server overrides the automatically obtained DNS.
Secondary DNS
•
Entering the secondary DNS server overrides the automatically obtained DNS.
User Manual
Page 44 / 92
Advertisement
Table of Contents
Need help?
Do you have a question about the IMBER SMART and is the answer not in the manual?