Appendix D - Cli - Teldat IMBER SMART User Manual

IMBER SMART – Industrial Series
Chapter 9 Appendix D - CLI
The command-line interface (CLI) is a software interface that provides an alternative
configuration method for setting router parameters. Use Telnet or SSH to connect to the router
and execute CLI commands.
IMBER SMART CLI Access
imber.router login: admin
Password: admin
>
CLI reference commands
>?
config
exit
help
ping
reboot
show
telnet
traceroute
upgrade
version
e.g.,
> version
1.0.0 (1017.4)
> show wifi
wifi
{
"status":"Ready",
"mac":"a8:3f:a1:e0:ab:81",
"ssid":"IMBER SMART-WAN",
"channel":"6",
"width":"40 MHz",
"txpower":"20.00 dBm"
}
> ping www.google.com
PING www.google.com (142.250.184.14): 56 data bytes
Change to the configuration mode
Exit this CLI session
Display an overview of the CLI syntax
Ping
Reboot system
Show running configuration or running status
Telnet Client
TraceRoute
Upgrade firmware
Show firmware version
User Manual
Page 90 / 92