Teldat IMBER SMART User Manual page 42

IMBER SMART – Industrial Series
Wi-Fi AP
This page allows you to configure the Wi-Fi AP settings:
Wi-Fi->Wi-Fi AP
Enable
•
Checking this box will enable the Wireless interface.
SSID
•
The SSID is the name given to identify the wireless local network. Devices connecting to the IMBER
SMART router's Wi-Fi access point will identify the Access Point using this SSID.
Enable Broadcast SSID
•
Leaving this checkbox unchecked disables the SSID broadcast feature. Other wireless devices will no
longer be able to find the SSID and users will need to manually enter the SSID to connect to the
wireless network.
Security Mode
•
Select the security mode from "None", "WEP" or "WPA PSK".
WPA Type
•
Select the WPA Type from "Auto","WPA" and "WPA2".
Encryption Type
•
Select the encryption method. Options are "Auto", "TKIP", or "CCMP". Note that not all options will
be available depending on the authentication method selected.
Password
•
User Manual
Page 41 / 92