Ip Passthrough - Teldat IMBER SMART User Manual

IMBER SMART – Industrial Series

5.5.4 IP Passthrough

IP Passthrough mode disables NAT and routing and passes the WAN IP address from the WAN
interface to the device connected on the local Interface. It provides an alternative to Network
Address Translation (NAT) when you want to make the router "transparent" in the communication
process.
Network->IP Passthrough
Enable
•
Checking this box enables IP Passthrough.
Passthrough Host MAC
•
Enter the MAC of the passthrough host to receive the WAN IP address.
Remote HTTPS Access Reserved
•
Check this box to allow remote access to the router via https when in IP Passthrough mode.
Remote Telnet Access Reserved
•
Check this box to allow remote telnet to the router when in IP Passthrough mode.
Remote SSH Access Reserved
•
Check this box to allow remote SSH to the router when in IP Passthrough mode.
User Manual
Page 57 / 92