Table of Contents
Advertisement
IMBER SMART – Industrial Series
Route->Static Route Settings
Description
•
Enter a description for the current static route rule.
IP Address
•
Enter the IP address of the destination network.
Netmask
•
Enter the subnet mask of the destination network.
Gateway
•
Enter the IP address of the local gateway.
Metric
•
Enter the metric value for the current static route rule. A smaller value indicates a higher priority.
Interface
•
Please refer to the Network->Route->Status interface.
User Manual
Page 55 / 92
Advertisement
Table of Contents
Need help?
Do you have a question about the IMBER SMART and is the answer not in the manual?