Table of Contents
Advertisement
IMBER SMART – Industrial Series
Firewall->ACL
Description
•
Add a description for this rule.
Chain
•
Specify the ACL forward rule. Choose between "FORWARD" and "INPUT".
Protocol
•
All: Any protocol number.
TCP: TCP protocol.
UDP: UDP protocol.
TCP & DUP: both the TCP and UDP protocols
ICMP: ICMP protocol.
Source Address
•
A specific host IP address can also be specified, or a range of IP addresses via a bitmask (the box
following the /).
Destination Address
•
You can also specify a specific IP address or a range of IP addresses using a bitmask (the box
following the /).
Firewall->Port Mapping
Description
•
Add a description for this rule.
Protocol
•
All: Any protocol number.
TCP: TCP protocol.
UDP: UDP protocol.
Remote Address
•
Enter a WAN IP address that is allowed to access the unit.
Remote Port
•
Enter the external port number range for incoming requests.
User Manual
Page 52 / 92
Advertisement
Table of Contents
Need help?
Do you have a question about the IMBER SMART and is the answer not in the manual?