Teldat IMBER SMART User Manual page 61

IMBER SMART – Industrial Series
Enable
•
Check this box to enable the SMS feature.
Enable SMS Control
•
Check this box to enable the SMS control feature.
Authentication Type
•
Specify the authentication mode for SMS. Options are "None" and "Password".
Description
•
Enter a description of the Phone Book
Phone Number
•
Enter a special phone number and only allow this phone number to send SMS messages to the
router.
The SMS Gateway feature allows you to send SMS messages using a valid syntax from serial or
ethernet devices.
Application->SMS>Gateway
Enable
•
Check this box to enable the SMS gateway feature.
Authentication Type
•
Specify the authentication mode for SMS. Options are "None" and "Password".
SMS Source
•
Specify the SMS source from which to receive the valid syntax. Options are "Serial Port" and "HTTP(S)
GET/POST".
SMS Message Format
•
Specify the SMS format when reading SMS messages or SMS lists via "HTTP(S) GET/POST". Options are
"Text" and "PDU".
Serial Port
•
Select the serial port. Options are COM1 and COM2.
Baud Rate
•
Select the serial port baud rate. Valid values are 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, or 115200.
Data Bits
•
Select a value from the dropdown list. Options are 7 or 8.
Stop Bits
•
User Manual
Page 60 / 92