Teldat IMBER SMART User Manual page 66

IMBER SMART – Industrial Series
Application->GPS->GPS
Enable
•
Check this box to enable GPS.
Enable A-GPS
•
Check this box to enable A-GPS (Assisted Global Positioning).
Description
•
Enter a description for the GPS transmission channel.
Report GSV
•
Check this box to enable sending GPS data in GSV format.
Report GGA
•
Check this box to enable sending GPS data in GGA format.
Report VTG
•
Check this box to enable sending GPS data in VTG format.
Report RMC
•
Check this box to enable sending GPS data in RMC format.
Report GSA
•
Check this box to enable sending GPS data in GSA format.
Report Interval
•
Specify the time interval at which GPS data is sent to the remote server.
NMEA Prefix
•
Self-defined. GPS data prefix to send to the remote server.
Protocol
•
Specify the channel's transmission protocol.
Remote Address
•
Specify the remote IP address that will receive the GPS data.
Remote Port
•
Specify the remote port that will receive the GPS data.
User Manual
Page 65 / 92