Table of Contents
Advertisement
IMBER SMART – Industrial Series
Ethernet->LAN->Multiple IP Settings
Interface
•
Select the configured LAN port for this subnet.
IP Address
•
Enter multiple IP addresses for this interface.
Netmask
•
Enter the subnet mask for this subnet.
Ethernet->VLAN->VLAN Trunk Settings
Interface
•
Select the LAN port for this VLAN trunk.
VID
•
Specify the VLAN ID for this VLAN trunk.
IP Address
•
Enter the IP address for this VLAN trunk.
Netmask
•
Enter the subnet mask for this VLAN trunk.
User Manual
Page 39 / 92
Advertisement
Table of Contents
Need help?
Do you have a question about the IMBER SMART and is the answer not in the manual?