Teldat IMBER SMART User Manual page 69

IMBER SMART – Industrial Series
VPN->OpenVPN
Enable
•
Check this box to enable OpenVPN tunnel.
Description
•
Enter a description for this OpenVPN tunnel.
Mode
•
Select between "P2P", "Client" and "Server".
Protocol
•
Select between "UDP", "TCP Client" and "TCP Server".
Connection Type
•
Select between "TUN" and "TAP", which are two different kinds of device interfaces for OpenVPN.
The difference between TUN and TAP devices is that a TUN device is a point-to-point virtual device
on the network while a TAP device is a virtual device on Ethernet.
Server Address
•
Enter the IP address or domain of the remote server.
Server Port
•
Enter the negotiation port on the OpenVPN server.
User Manual
Page 68 / 92