Configure Vlan Port Setting - ZyXEL Communications NSW Series User Manual

Table 13 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (continued)
LABEL
Add
Cancel
Clear
VID
Active
Name
Delete
Cancel

7.5 Configure VLAN Port Setting

Use the VLAN Port Setup screen to configure the static VLAN settings on a port. Click the VLAN Port Setup
link in the VLAN Configuration screen.
Figure 39 Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup
Chapter 7 VLAN
DESCRIPTION
Click Add to save your changes to the NSW's run-time memory. The NSW loses these changes if it
is turned off or loses power, so use the Save link on the top-right of the Web Configurator to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to change the fields back to their last saved values.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the VLAN settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the check boxes.
NSW Series User's Guide
44