Table of Contents
Advertisement
4.1 Overview
This section introduces the configuration and functions of the web configurator.
The web configurator is an HTML-based management interface that allows easy Switch setup and
management via Internet browser. Use Internet Explorer 9.0 and later versions, Mozilla Firefox 21 and
later versions, Safari 6.0 and later versions or Google Chrome 26.0 and later versions. The recommended
screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Note: The screens are based on the Switch in standalone mode.
4.2 System Login
Start your web browser.
1
The Switch is a DHCP client by default. Type "http://DHCP-assigned IP" in the Location or Address field.
2
Press [ENTER].
If the Switch is not connected to a DHCP server, type "http://" and the static IP address of the Switch (for
example, the default management IP address is 192.168.1.1) in the Location or Address field. Press
[ENTER]. Your computer must be in the same subnet in order to access this website address.
Also, you can use the ZON Utility to check your Switch's IP address (see
The following screen appears.
3
You can click the play icon to watch a tutorial video on how to create an NCC account or click the link
to access the NCC portal. The NCC is a cloud- based network management system that allows you to
remotely manage and monitor the Switch in Nebula cloud management mode. Click Standalone Mode
to go back to the login screen and continue with the next step.
The Web Configurator
XS1930 Series User's Guide
C
H A P T E R
39
Section 4.3 on page
44).
4
Advertisement
Table of Contents
Troubleshooting
