Show Ip; Show Logging; Figure 106 Show Ip Command Example - ZyXEL Communications Dimension GS-2024 User Manual

GS-2024 User's Guide

28.2.2 show ip

Syntax:
This command displays the IP related information (such as IP address and subnet mask) on all
switch interfaces.
The following figure shows the default interface settings.

Figure 106 show ip Command Example

ras> show
Out-of-band Management IP Address = 192.168.0.1
Management IP Address
IP[192.168.0.1], Netmask[255.255.255.0], VID[0]
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>

28.2.3 show logging

Note: This command is not available in User mode.
Syntax:
This command displays the system logs. The following figure shows an example.
200
show ip
ip
show logging
Chapter 28 Command Examples