Setting Up Login Accounts; Figure 54 Access Control: Logins - ZyXEL Communications ES-315 - V3.70 User Manual

Chapter 16 Access Control
Table 36 Access Control: SNMP (continued)
LABEL
Apply
Cancel

16.3.4 Setting Up Login Accounts

Up to five people (one administrator and four non-administrators) may access the Switch via
web configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The
username for the Administrator is always admin. The default administrator password is
1234.
It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can view
but not configure Switch settings.
Click Access Control from the navigation panel and then click Logins.

Figure 54 Access Control: Logins

104
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Click Cancel to begin configuring this screen afresh.
ES-315/ES-315-F User's Guide