To Connect The Electricity Meters - Daikin EBLA09D V3 Series Installer's Reference Manual

9 | Electrical installation

9.2.7 To connect the electricity meters

Installer reference guide
112
3 Fix the cable with cable ties to the cable tie mountings.
Wires: 2 (per meter)×0.75 mm²
Electricity meters: 12 V DC pulse detection (voltage supplied by PCB)
[9.A] Energy metering
INFORMATION
In case of an electricity meter with transistor output, check the polarity. The positive
polarity MUST be connected to X5M/6 and X5M/4; the negative polarity to X5M/5
and X5M/3.
1 Open the service cover. See
2 Connect the electricity meters cable to the appropriate terminals as shown in
the illustration below.
3 Fix the cable with cable ties to the cable tie mountings.
X2M
"7.3.2 To open the outdoor
S2S
X5M.6
X5M.5
S3S
X5M.4
X5M.3
X5M
3 4 5 6
4
unit" [ 72].
EBLA09~16D + EDLA09~16D
Daikin Altherma 3 M
4P620241-1B – 2022.05