Test The New Transporter; Reimport Media Packs And Update Inventory; Restart Backups - Spectra Logic T-Series Spectra T200 User Manual

Assisted self-maintenance guide
Hide thumbs Also See for T-Series Spectra T200:
Table of Contents

Advertisement

Test the New Transporter

Perform the following test to confirm that the new transporter is functioning properly.
The test takes approximately 10 minutes.
1. Select Maintenance > Tools > Diagnostics. The Diagnostics screen displays.
2. Select All Motion Basic Tests. The Utilities screen refreshes to display information
about the selected diagnostic (see Figure 9-2 on page 75).
3. Select Run Diagnostic. A series of progress screens display as each test is run.
4. When all of the tests are complete, the Diagnostic Results screen displays showing
the result of each test (Figure 9-33).
5. Scroll through the list of tests to confirm that all of the tests were successful.
Figure 9-33 The Diagnostic Results screen.

Reimport Media Packs and Update Inventory

If you removed media packs from the front of the library during the replacement
procedure, reimport them using the library user interface and TAP. Refer to the Spectra
T200 &T380 Library User Guide for instructions.
After you finish importing the media packs, update the inventory using your backup
software.

Restart Backups

Use your backup software to restart any backup processes running on library.
Completing the Replacement
99

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T-Series Spectra T200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

T380

Table of Contents