Chapter 8 - Replacing The Lcm; Before You Begin; Required Tools And Materials - Spectra Logic T-Series Spectra T200 User Manual

8
Replacing the LCM

Before You Begin

The library contains a single Library Control Module (LCM). The LCM provides the
logic and circuitry to display the user interface on the library's touch screen. The LCM
includes an embedded web server to provide remote access to the user interface
through the Remote Library Controller (RLC) using a standard web browser. Figure 8-1
shows the available connections on the LCM.
Note:
Depending on the ASM service level you purchased, the LCM may
not be included in your on-site ASM kit.
Keyboard LMC reset
Mouse
Figure 8-1 Connections to the LCM.

Required Tools and Materials

You must have the following to complete this procedure:
A #1 Phillips screwdriver
A #2 Phillips screwdriver
A new LCM module
Note:
After removing the new LCM from its packaging, keep the
packaging to return the old LCM to Spectra Logic.
Monitor
connector
Ethernet connector
USB port
67