Prepare To Import A Magazine - Spectra Logic T-Series Spectra T200 User Manual

3. Select either EE->TAP or Storage->TAP as the Direction for the move, then select
Go.
If you want to locate an empty slot in the EE pool, select EE->TAP.
If you want to locate an empty slot in the storage pool, select Storage->TAP.
4. Select a TeraPack magazine from the Chambers list, then select Go. The TeraPack
Case Contents list refreshes to display the inventory of the magazine. If the
magazine does not contain an empty slot, repeat the selection process until you
find a magazine with an empty slot.
Note:
If you have trouble locating an empty slot, try using the backup
software to locate an empty slot.
If you are unable to find any empty slots, import a magazine
containing the cartridge into an empty chamber in the library.
Follow the instructions in Prepare to Import a Magazine on
page 43.
5. Select Add Move. The specified move is added to the Move Queue list.
6. Select Start Moves.
7. When the TeraPack magazine containing the empty slot is delivered to the TAP, the
TAP door opens. Remove the magazine from the TAP.
8. Proceed to Import the Cleaning Cartridge on page 45.

Prepare to Import a Magazine

If you exported a magazine with an empty slot to use for importing the cleaning
cartridge, proceed to Import the Cleaning Cartridge on page 45. If you are unable to
locate a TeraPack magazine with an empty slot or if you want to keep the cleaning
cartridge in its own magazine, prepare to import a magazine containing the cleaning
cartridge into the library as described in this section.
Importing a Cleaning Cartridge
43