Quick Start
4.3.2
To Connect to Power
The power requirements of the oscilloscope are DC, 12 V, 4 A. Please use the power
adaptor provided in the accessories to connect the oscilloscope to the AC power
source (100 V to 240 V, 50 Hz to 60 Hz), as shown in the figure below.
Table 4.1 Power Adaptor Specifications
Item
Input
Output
CAUTION
The power adaptor provided in accessories can only be used to power RIGOL instruments.
Do not use it for mobile phone and other devices.
WARNING
To avoid electric shock, ensure that the instrument is correctly grounded.
4.3.3
Turn-on Checkout
After the instrument is connected to the power source, press the power key
lower-left corner of the front panel to power on the instrument. During the start-up
DHO800 User Guide
12
Figure 4.4 To Connect to Power
Description
100 V to 240 V, 50 Hz to 60 Hz, 1.2 A Max
DC, 12 V, 4 A, 48 W
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Power Cord Connector
at the